Need metalworking lubricant recommendation.

[Jim F]

I will clarify.
This for where I work, a production shop.
we have runs of up to 4k items at a time.
mat'l is 1018 and 4140 mostly.
blanks are about 7" long and 4" wide.
holes that get pierced are 1/4,3/16, and 1/8.
forming is usually done on the 75 and 90 ton presses.

 

[ChazzC]

I will clarify.
This for where I work, a production shop.
we have runs of up to 4k items at a time.
mat'l is 1018 and 4140 mostly.
blanks are about 7" long and 4" wide.
holes that get pierced are 1/4,3/16, and 1/8.
forming is usually done on the 75 and 90 ton presses.

Sounds like you’re a good candidate for some ITW samples!