Lighting solutions?

[JimDawson]

I wonder where you can get this style of worklight

McMaster-Carr

McMaster-Carr is the complete source for your plant with over 595,000 products. 98% of products ordered ship from stock and deliver same or next day.

www.mcmaster.com

 

[7milesup]

That light there Jim is 1/4 the price of my small PM1022 lathe!

I have a light over my lathe that was purchased from a department store going out of business. They had numerous high quality articulating lights, of which I bought two for $10 each. Put an LED bulb in it and I was golden.

 

[Pcmaker]

They have a variety of these at Amazon for cheap

https://www.amazon.com/Globe-Electric-56963-Multi-Joint-Metal/dp/B00HX2EVPS

 

[pontiac428]

Here's an alternative to the McMaster machine lamps. If you're going to pay that much for it, you may as well get one designed by Lauren and plated with 24k gold bling. Only $899.
-->link if you're serious<--

 

[JimDawson]

They have a variety of these at Amazon for cheap

https://www.amazon.com/Globe-Electric-56963-Multi-Joint-Metal/dp/B00HX2EVPS

Maybe this in more in reasonable budget range

https://www.amazon.com/Lights-Table-Machine-Multipurpose-Waterproof/dp/B07PQQDV4H/ref=sr_1_24?dchild=1&keywords=MACHINE+LAMP&qid=1607119264&s=hi&sr=1-24

 

[Mitch Alsup]

Here's an alternative to the McMaster machine lamps. If you're going to pay that much for it, you may as well get one designed by Lauren and plated with 24k gold bling. Only $899.
-->link if you're serious<--

That light is 25% the cost of my whole mill ! (G0730 before tarrif)

 

[talvare]

I like your fine feed hand wheel on the mill! ??

Thanks Rick. I just made it from some 5/8" HR plate I had on hand. It works well.
Ted

 

[7milesup]

Maybe this in more in reasonable budget range

https://www.amazon.com/Lights-Table-Machine-Multipurpose-Waterproof/dp/B07PQQDV4H/ref=sr_1_24?dchild=1&keywords=MACHINE+LAMP&qid=1607119264&s=hi&sr=1-24

Now you are cooking with gas!

 

[Weldingrod1]

I've been dreaming of putting a ring light on the bottom face of my quill, but I haven't had the requisite flash of inspiration on cable tendering... yeah, the ring light on the housing is a big improvement, especially when the quill is up. Down, not so awesome :-(

Sent from my SM-G892A using Tapatalk

 

[Dave Smith]

I needed bright lighting bad around my machines and work areas--especially my lathe and work benches. I tried the Braun 4' led 5000 lumen hanging light from harbor freight $18 and was impressed enough to buy 4 more to make my life much brighter. very easy to swing one end and adjust height with the chains. at 77 now I can see all my projects and tools very clearly.
Dave