bretthl,
The method I used was to manually traverse the carriage the required distance multiple times applying additional pressure with each pass until you are completed. My preference for this type of knurler is to reduce the force needed using the more traditional tooling. Basically, minimize the load on the spindle bearings.
beino,
Thank You for the positive comment.
Shelly
The method I used was to manually traverse the carriage the required distance multiple times applying additional pressure with each pass until you are completed. My preference for this type of knurler is to reduce the force needed using the more traditional tooling. Basically, minimize the load on the spindle bearings.
beino,
Thank You for the positive comment.
Shelly