- Joined
- Jul 9, 2023
- Messages
- 12
After about a year of waiting, I grabbed the missing part I did not have for my Hardinge HV-4N made 5C collet indexer.
Problem was that upon getting it, realize that the indexing pin was substituted with a small filed down allen screw to act as the ratchet pin that rides on the front ring along the scalloped machined ring surface. I will show picture of what I mean. The second thing was a pin that just limits the throw of the lever.
I would appreciate an image of the pin spring thing, a measurement of the pin. Is it a plunger set up?
The two halves look to be from different manufacturers. Thank you temporary bin of parts!
I'm surprised how clean the main unit is, its black crinkle paint looks like it was done yesterday. I'm sure I can squeeze another six months finishing this up at my speed. I was already going to sacrifice a tool bit, 3/16", to get the party started. I'll wait for amazonprimed with my 3/16" rod.
Thank you ahead of time.
Problem was that upon getting it, realize that the indexing pin was substituted with a small filed down allen screw to act as the ratchet pin that rides on the front ring along the scalloped machined ring surface. I will show picture of what I mean. The second thing was a pin that just limits the throw of the lever.
I would appreciate an image of the pin spring thing, a measurement of the pin. Is it a plunger set up?
The two halves look to be from different manufacturers. Thank you temporary bin of parts!
I'm surprised how clean the main unit is, its black crinkle paint looks like it was done yesterday. I'm sure I can squeeze another six months finishing this up at my speed. I was already going to sacrifice a tool bit, 3/16", to get the party started. I'll wait for amazonprimed with my 3/16" rod.
Thank you ahead of time.