Been modifying a small benchtop blast cabinet.

I like the wolf spiders, they keep the other bugs away. We had crickets for a while in the basement. They are finally gone.
I just don't like them in my gloves, shoes, shirts... I have respect for the little guys and girls. After all, 8 legs, and 8 eyes. They've got more than a leg up on me, and they are keeping a few eyes on me. :grin:
 
I like the wolf spiders, they keep the other bugs away. We had crickets for a while in the basement. They are finally gone.
I just don't like them in my gloves, shoes, shirts... I have respect for the little guys and girls. After all, 8 legs, and 8 eyes. They've got more than a leg up on me, and they are keeping a few eyes on me. :grin:
Yes sir, looks good. Need to make some covers for mine as well. Here’s a few pictures of my set up as I was working on it. Nothing fancy but she is something serious when it comes to blasting
 

Attachments

  • IMG_2300.png
    IMG_2300.png
    1.2 MB · Views: 24
  • IMG_1745.jpeg
    IMG_1745.jpeg
    249.3 KB · Views: 20
  • IMG_1746.jpeg
    IMG_1746.jpeg
    286.2 KB · Views: 17
  • IMG_1747.jpeg
    IMG_1747.jpeg
    257.6 KB · Views: 16
  • IMG_1749.jpeg
    IMG_1749.jpeg
    309.5 KB · Views: 16
  • IMG_1750.jpeg
    IMG_1750.jpeg
    256.6 KB · Views: 16
  • IMG_1751.jpeg
    IMG_1751.jpeg
    282.5 KB · Views: 17
  • IMG_1761.jpeg
    IMG_1761.jpeg
    314.7 KB · Views: 22
Today I modified a reducer in PVC, I bored the smaller end to the same size as the 1 1/4 inch pvc. I used a street for the 90.
I added a dog point screw and a groove in the pipe so it can swing if I need to pull the cabinet over.
The hex side was modified as well. removed the writing on the pvc, added grooves for the existing locking pins to fit into, so I can put it on and off if needed.
PXL_20241108_232211712.jpgPXL_20241108_232246735.jpgPXL_20241108_232252999.jpgPXL_20241108_232301925.jpg
 
Today I modified a reducer in PVC, I bored the smaller end to the same size as the 1 1/4 inch pvc. I used a street for the 90.
I added a dog point screw and a groove in the pipe so it can swing if I need to pull the cabinet over.
The hex side was modified as well. removed the writing on the pvc, added grooves for the existing locking pins to fit into, so I can put it on and off if needed.
View attachment 508824View attachment 508823View attachment 508822View attachment 508821
Looking good. You may at some point want to put a collector of some sort between the vacuum and the cabinet. I’m always surprised at how much mine collects
 
Back
Top