Backing Plate(South Bend 10K)-HELP PLEASE !

Yup, does hours running and a tach. Best thing i bought for it, lol... I'm also restoring a heavy 10. It's what i originally wanted for gunsmithing because of the spindle bore but settled for the 10k till i get the heavy 10 done. This 10K is a really nice machine though just wish the bore was bigger. I made a little 12" test cut the other night after tweaking the lathe a little. I'm guessing i have a little wear in the ways ? The finish is unbelievable for this little machine !20200415_182153.jpg
 
Last edited:
Dave or AJ , I have a SB backing plate and a Bison 4 jaw scroll chuck left over down the basement . The lathe is long gone . If you need one or both let me know . I cold use he chuck but not the plate .
 
mmcmdl said:
Dave or AJ , I have a SB backing plate and a Bison 4 jaw scroll chuck left over down the basement . The lathe is long gone . If you need one or both let me know . I cold use he chuck but not the plate .
Click to expand...
Actually i could use them. Let me know what you're asking for both. I have collected a couple cheap ones but one is cracked and the other seems to loose concentricity mid cut. Lol
 
Thanks Dave, I’m good for backing plates and chucks with my 3 and 4 jaw.
Appreciate the offer!
Stay well !


Sent from my iPhone using Tapatalk
 
You must log in or register to reply here.
Back
Top