babbit bearing issue

[waynesworld]

I feel like I accomplished something up loading these pictures. First time for me. This is 1/2 of one bearing. It goes around the crankshaft in two pieces inside the connecting rod. The ruler I had is in mm. Not for exact size but mainly for refference. Unlike the old machines where you pour in place I think these would have to be poured differently. Thank you for all your posts and now my ramblings make more sense.

 

[OldMachinist]

You may want call these people to see if they can help.
http://www.obbco.com/

 

[flutedchamber]

If you can supply the measurements and the bearing is made, these people either have it or can get it. They pulled my fat out of the fire countless times.

http://camden.number.com/general-automotive-repair-shops/mootwasi-engine-rebuilders-9182832.html

Mootwasi Engine Rebuilders

 

[waynesworld]

I contacted Odessa bearing first and they asked me how thick it was. I told them without a caliper It was between 1/16th and 1/8th and the replied 1/4" was thin for them. There is a bearing place in Syracuse, Ny that is going to give me a bid.