5/8 Straight Boring Head Shanks (7/8-20)

[hman]

I read that a 3/4" shank would be too large for your machine. Would a 1/2" straight shank work?
http://littlemachineshop.com/products/product_view.php?ProductID=4824&category=

 

[Uglydog]

Not sure if you have anything reads on threading.
There are many good ones available.
Here is one.
http://neme-s.org/Shaper Books/Tapers and tThreading.pdf

Daryl
MN

 

[lewistoole]

If you don't feel confident enough to create one, Victor Machinery on line sells 1/2", 3/4" and 1" arbors in 7/8" X 20 tpi for $16 ea.

 

[SmokeWalker]

I read that a 3/4" shank would be too large for your machine. Would a 1/2" straight shank work?
http://littlemachineshop.com/products/product_view.php?ProductID=4824&category=

If you don't feel confident enough to create one, Victor Machinery on line sells 1/2", 3/4" and 1" arbors in 7/8" X 20 tpi for $16 ea.

Not sure if you have anything reads on threading.
There are many good ones available.
Here is one.
http://neme-s.org/Shaper Books/Tapers and tThreading.pdf

Daryl
MN

I bought the 3/4" shank, and I think I'll turn it down. I'm pretty excited, honestly.

 

[SmokeWalker]

Not sure if you have anything reads on threading.
There are many good ones available.
Here is one.
http://neme-s.org/Shaper Books/Tapers and tThreading.pdf

Daryl
MN

Well that was a good read. Thank you very much!