2016 POTD Thread Archive

[TOOLMASTER]

I hold a rod in the middles and spin it with a rope ;-)

 

[TOOLMASTER]

i have yet to fire it up with my 100,000 rpm die grinder..lol

 

[davidh]

Did I ever tell you about the time I went to Home Depot for a replacement cord for my table saw? I wanted 12 feet of 12-2, stranded, rubber jacket. They had a 16 foot remnant of 10-3, stranded, rubber jacket hanging on the hook at the bulk dispenser. That would work. So the old guy who was working (and who has always been the most helpful there) wrote it up as a shorter length of lighter gauge wire. Cost me like $6. Score!

Well, I stopped there on my way home today thinking maybe, just maybe, I can score a deal like that again. And they had a 10-3 length hanging there AGAIN. Incredible. And the same guy was working. So I ask him how much and he looks at me puzzled. He says, "that's not 10 gauge, that's 8", and he started to write it up. I politely correct him and showed him where it said "AWG 10-3" on the side. He says they don't sell 10-3 by the foot. Scrolls through the machine to verify that's still true. The length didn't even match what was on the shelf.

So he gave it to me. 20 feet. I needed 12-15. He even walked me out the door to make sure no one gave me crap about it.

I really like that guy.

sometimes a quart of his favorite beverage will go a long way, but maybe not in utah. . .

 

[davidh]

i have yet to fire it up with my 100,000 rpm die grinder..lol

have you thought of putting a spinning lazer thing like whats available for your circle saw ??
sheesh, another project to put on the board. .

 

[TOOLMASTER]

i have one of those sitting in my den..lol

 

[T Bredehoft]

Not in my shop, but into it. Auction. 9" Craftsman band saw, 6" craftsman bench grinder. Yes, auction. They must have been display pieces. No tool rests on the grinder, no little square piece to fill the hole around the blade which was gone. Neither tool had ever been used. Square corners on the grinder wheels, no dust in the band saw. It had a $179.00 price, both cost (total) $65. The saw is all put together, tthe tool rests are planned.

 

[Nick01]

Hey everyone, I'm new to this forum and machining in general. I recently purchased a lathe and mill and have begun what seems like it will be a long fun process of making stuff out of metal.
I spent a few hours today making a brass scribe, kinda based off a popular YouTube video on the MAKE channel and kinda off my drafting pencil. I didn't take many photos in the process but here are some photos of my work.

View attachment 129986 View attachment 129987 View attachment 129988 View attachment 129993 View attachment 129994 View attachment 129995 View attachment 129996 View attachment 129997 View attachment 129998 View attachment 129999 View attachment 130000 View attachment 130001 View attachment 130002

 

[Bob Korves]

Nice job, Nick!

 

[thomas s]

Yes great job.

 

[kvt]

That looks good, keep it going