Photos

Navigation

  1. Member Photos 248
  2. H-M Video Library 2
    1. Commercial & Sponsor Video Channels 2
Browse albums

Trending media

Another view of the spindle keyway that lock washer seats into.

Another view of the spindle keyway that lock washer seats into.

  • Reaction score 0
  • Comments 0
This is the keyway that the lock washer slides into when installed.

This is the keyway that the lock washer slides into when installed.

  • Reaction score 0
  • Comments 0
Lock washer side view showing internal set tab.

Lock washer side view showing internal set tab.

  • Reaction score 0
  • Comments 0
Side view of lock nut.

Side view of lock nut.

  • Reaction score 0
  • Comments 0
Lock nut and lock washer that come off first.

Lock nut and lock washer that come off first.

  • Reaction score 0
  • Comments 0
Use the hook spanner and the dead blow hammer to loosen the spindle locking nut.

Use the hook spanner and the dead blow hammer to loosen the spindle locking nut.

  • Reaction score 0
  • Comments 0
Use a screw driver and a mallet to bend the tab back.

Use a screw driver and a mallet to bend the tab back.

  • Reaction score 0
  • Comments 0
You will need to bend the tab back out of the way on the lock washer.

You will need to bend the tab back out of the way on the lock washer.

  • Reaction score 0
  • Comments 0
Mount the spindle in a vice...using brass/soft jaws. I have mine covered with brass sheets. Have the bearings on your left.

Mount the spindle in a vice...using brass/soft jaws. I have mine covered with brass sheets. Have the bearings on your left.

  • Reaction score 0
  • Comments 0
Closer view of tools needed....yeah I know extra picture but hey I took it.

Closer view of tools needed....yeah I know extra picture but hey I took it.

  • Reaction score 0
  • Comments 0
Tools you will need for your spindle rebuild.

Tools you will need for your spindle rebuild.

  • Reaction score 0
  • Comments 0
Spindle looking at the "output" end inside...collet end

Spindle looking at the "output" end inside...collet end

  • Reaction score 0
  • Comments 0
Spindle looking at the "out put" end from the side.

Spindle looking at the "out put" end from the side.

  • Reaction score 0
  • Comments 0
spindle view looking at the lower set of bearings.

spindle view looking at the lower set of bearings.

  • Reaction score 0
  • Comments 0
Spindle top view down looking at the lock nut. Held in place with the lock washer tab bent into it.

Spindle top view down looking at the lock nut. Held in place with the lock washer tab bent into it.

  • Reaction score 0
  • Comments 0
Input end of the spindle shaft. View 1.

Input end of the spindle shaft. View 1.

  • Reaction score 0
  • Comments 0
Overview of the spindle as it looks after being pulled from the Quill.

Overview of the spindle as it looks after being pulled from the Quill.

  • Reaction score 0
  • Comments 0
Tighten the spindle nose piece on with the set screw once aligned. Test the spindle to make sure it spins without binding.

Tighten the spindle nose piece on with the set screw once aligned. Test the spindle to make sure it spins without binding.

  • Reaction score 0
  • Comments 0
Install the spindle nose piece. You will probably have to back off the nose piece to get it to align with the counter sink in the threads.

Install the spindle nose piece. You will probably have to back off the nose piece to get it to align with the counter sink in the threads.

  • Reaction score 0
  • Comments 0
Quill view showing where the set screw for the spindle nose piece goes. It's on the back of the quill.

Quill view showing where the set screw for the spindle nose piece goes. It's on the back of the quill.

  • Reaction score 0
  • Comments 0
Spindle nose piece showing the set screw and the set screw countersink.

Spindle nose piece showing the set screw and the set screw countersink.

  • Reaction score 0
  • Comments 0
Spindle nose piece assembly with set screw.

Spindle nose piece assembly with set screw.

  • Reaction score 0
  • Comments 0
Install your spindle. Make sure it's clean and becareful when feeding it in to get it through the middle of the felt washer at the top of the quill.

Install your spindle. Make sure it's clean and becareful when feeding it in to get it through the middle of the felt washer at the top of the quill.

  • Reaction score 0
  • Comments 1
The installed depth scale.

The installed depth scale.

  • Reaction score 0
  • Comments 0
Back
Top