Photos

Remove the 4 cap head screws holding the yoke in place.

Remove the 4 cap head screws holding the yoke in place.

  • Reaction score 0
  • Comments 0
Remove the oil lines from the yoke. They just pull out.

Remove the oil lines from the yoke. They just pull out.

  • Reaction score 0
  • Comments 0
Saddle gib adjustment screw closeup.

Saddle gib adjustment screw closeup.

  • Reaction score 0
  • Comments 0
Overview of the saddle gib and adjustment screw. Showing oil pathways as well.

Overview of the saddle gib and adjustment screw. Showing oil pathways as well.

  • Reaction score 0
  • Comments 0
Remove the saddle gib. Unscrew the adjustment screw and pull it free. Simple!

Remove the saddle gib. Unscrew the adjustment screw and pull it free. Simple!

  • Reaction score 0
  • Comments 0
Center of my cross feed screw.

Center of my cross feed screw.

  • Reaction score 0
  • Comments 0
Far end of my cross feed screw.

Far end of my cross feed screw.

  • Reaction score 0
  • Comments 0
Handle end view of the cross feed screw.

Handle end view of the cross feed screw.

  • Reaction score 0
  • Comments 0
Cross feed screw removed.

Cross feed screw removed.

  • Reaction score 0
  • Comments 0
Time to remove the cross feed screw. Unscrew it until it comes free.

Time to remove the cross feed screw. Unscrew it until it comes free.

  • Reaction score 0
  • Comments 0
View of the cross feed screw looking in.

View of the cross feed screw looking in.

  • Reaction score 0
  • Comments 0
Cross feed screw ready to remove.

Cross feed screw ready to remove.

  • Reaction score 0
  • Comments 0
Bearing bracket and the two bearings you just removed.

Bearing bracket and the two bearings you just removed.

  • Reaction score 0
  • Comments 0
Press or tap out your 2 bearings.

Press or tap out your 2 bearings.

  • Reaction score 0
  • Comments 0
Bearing bracket and bearing retainer plus screws. Should be removed now.

Bearing bracket and bearing retainer plus screws. Should be removed now.

  • Reaction score 0
  • Comments 0
Remove the 3 cap screws holding the bearing retainer in place.

Remove the 3 cap screws holding the bearing retainer in place.

  • Reaction score 0
  • Comments 0
Remove the bearing bracket.

Remove the bearing bracket.

  • Reaction score 0
  • Comments 0
Remove the 4 cap head screws holding the bearing bracket in place.

Remove the 4 cap head screws holding the bearing bracket in place.

  • Reaction score 0
  • Comments 0
Another woodruff key to remove.

Another woodruff key to remove.

  • Reaction score 0
  • Comments 0
Remove this nut and follow the directions from earlier. Just like the Table fee handle removal.

Remove this nut and follow the directions from earlier. Just like the Table fee handle removal.

  • Reaction score 0
  • Comments 0
Overview of the saddle handle parts removed. Just like the table feed handle parts.

Overview of the saddle handle parts removed. Just like the table feed handle parts.

  • Reaction score 0
  • Comments 0
One move view of the table. This would be the front side with the T-slot facing you ...flipped over.

One move view of the table. This would be the front side with the T-slot facing you ...flipped over.

  • Reaction score 0
  • Comments 0
Center webbing of the cast table underside.

Center webbing of the cast table underside.

  • Reaction score 0
  • Comments 0
Another view of the table flipped over....right side. So you are also looking at the back of the table normally.

Another view of the table flipped over....right side. So you are also looking at the back of the table normally.

  • Reaction score 0
  • Comments 0
Back
Top