The end of the feed screw.

The end of the feed screw.

  • Reaction score 0
  • Comments 0
Another view of the feed screw.

Another view of the feed screw.

  • Reaction score 0
  • Comments 0
A view of the bearing bracket (with bearings still installed there are 2)

A view of the bearing bracket (with bearings still installed there are 2)

  • Reaction score 0
  • Comments 0
Remove the 4 cap head screws holding the bearing bracket in place.

Remove the 4 cap head screws holding the bearing bracket in place.

  • Reaction score 0
  • Comments 0
A view of what you should have taken off by now in order of appearance. lol

A view of what you should have taken off by now in order of appearance. lol

  • Reaction score 0
  • Comments 0
Remove the three cap screws holding the bearing retainer.

Remove the three cap screws holding the bearing retainer.

  • Reaction score 0
  • Comments 0
Take the handle off as well.

Take the handle off as well.

  • Reaction score 0
  • Comments 0
We are starting with the left side table feed handle. Remove this nut first.

We are starting with the left side table feed handle. Remove this nut first.

  • Reaction score 0
  • Comments 0
expressline99

Bridgeport Series 1 VS 2hp Tear down of the table and saddle

Album information

Album owner
expressline99
Date created
Item count
82
View count
7,574
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

expressline99

Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top