Close up lower spindle bearing installed with shaft.

Close up lower spindle bearing installed with shaft.

  • 0
  • 0
Close up lower spindle bearing installed.

Close up lower spindle bearing installed.

  • 0
  • 0
Press the first lower bearing fully into place.

Press the first lower bearing fully into place.

  • 0
  • 0
Press the first lower bearing fully into place. View 2

Press the first lower bearing fully into place. View 2

  • 0
  • 0
Bottom view of the installed dirt shield.

Bottom view of the installed dirt shield.

  • 0
  • 0
Install the bearing dirt shield like this on the spindle.

Install the bearing dirt shield like this on the spindle.

  • 0
  • 0
Pack only 1/3 of area in the bearing. Like this. Do not fill it completely.

Pack only 1/3 of area in the bearing. Like this. Do not fill it completely.

  • 0
  • 0
Force the grease into 1/3 of the bearing space. This is the proper way. Do not fill it completely.

Force the grease into 1/3 of the bearing space. This is the proper way. Do not fill it completely.

  • 0
  • 0
Put some grease in your hand for packing the bearing like so. :)

Put some grease in your hand for packing the bearing like so. :)

  • 0
  • 0
I used Mobil ep 1 grease to pack the bearings.

I used Mobil ep 1 grease to pack the bearings.

  • 0
  • 0
Put the bearing dust shield first. This side down!

Put the bearing dust shield first. This side down!

  • 0
  • 0
NOS Top Bearing. Box showing part numbers.

NOS Top Bearing. Box showing part numbers.

  • 0
  • 0
NOS Top Bearing.

NOS Top Bearing.

  • 0
  • 0
New Matched bearing set. Picture of box with part numbers.

New Matched bearing set. Picture of box with part numbers.

  • 0
  • 0
New Matched bearing set.

New Matched bearing set.

  • 0
  • 0
New top spindle bearing.

New top spindle bearing.

  • 0
  • 0
Markings on lower spindle bearings. view 1

Markings on lower spindle bearings. view 1

  • 0
  • 0
New set of bearings.

New set of bearings.

  • 0
  • 0
Inner bearing spacer. Check in multiple areas to ensure the size is consistant. Then match with outer bearing spacer.

Inner bearing spacer. Check in multiple areas to ensure the size is consistant. Then match with outer bearing spacer.

  • 0
  • 0
Outer bearing spacer. Check in multiple areas to ensure the size is consistant. Then match with inner bearing spacer.

Outer bearing spacer. Check in multiple areas to ensure the size is consistant. Then match with inner bearing spacer.

  • 0
  • 0
Spindle bearing showing markings of "MRC 207SD 1"

Spindle bearing showing markings of "MRC 207SD 1"

  • 0
  • 0
Bearing dirt shield side view

Bearing dirt shield side view

  • 0
  • 0
Bearing dirt shield bottom view.

Bearing dirt shield bottom view.

  • 0
  • 0
Bearing dirt shield top view. This side towards the bearing.

Bearing dirt shield top view. This side towards the bearing.

  • 0
  • 0
expressline99

Bridgeport Series 1 VS 2hp Spindle rebuild & tear down

Tear down and rebuild of spindle bearings after it's been removed from the quill
Click to expand...
  • Like
Reactions: EmilioG

Album information

Album owner
expressline99
Date created
Item count
86
View count
8,526
Comment count
0
Rating
0.00 star(s) 0 ratings

Album privacy

expressline99

expressline99

Media items
1,002
Albums
19
Can view media items
Everyone
Can add media items
Album owner only

Share this album

Back
Top