I recently completed a CNC conversion of the knee on my mill. I 3D printed the timing pulleys and it's all working however I don't expect the 3D printed pulleys to last so I'm looking for either aluminum or steel to replace what I have.
Focus of this ad is for the large pulley and the larger the better but no larger than 151mm in diameter, which works out as follows:
AT10, 48 Teeth
T8, 59 Teeth
T5, 96 Teeth
Prefer 20mm or wider
When I have sourced the large pulley, finding a suitable matching smaller pulley will be less of a challenge.
So if you have something surplus from a project please let me know
Focus of this ad is for the large pulley and the larger the better but no larger than 151mm in diameter, which works out as follows:
AT10, 48 Teeth
T8, 59 Teeth
T5, 96 Teeth
Prefer 20mm or wider
When I have sourced the large pulley, finding a suitable matching smaller pulley will be less of a challenge.
So if you have something surplus from a project please let me know
