Desmocrat I'm jealous of what you ride I had a 903 SSSP , but getting back to your problem it may sound hokie but I made a new nut for a left hand screw and used a new allen wrench cut off and sharpened to fit, use an allen wrench that has a really tight 90° bend, only reason that I did this is because I didn't have a boring bar small enough and the wrench works like a charm, and the nut material was Ampco 18 which is some NASTY stuff because it has 18% iron in it you can pick up the chips with a magnet. The screw and nut came out of a trailer tongue electric jack.
Last edited by a moderator: