- Joined
- Dec 25, 2011
- Messages
- 10,513
It appears, after looking through two Machinery's Handbooks decades apart, that your spindle taper is a Stub 5MT. The actual large end diameter is 1.748". The part that you need is a 5MT to 5C adapter. Look at eBay Item
111653854076. The shiny flanged piece in the middle of the lower row in the main photograph is one. I imagine that the odds of the seller being willing to sell only that piece are slim and none. But at least you can see what one looks like. The only thing near that I found on eBay tonight fits a Heavy 10. I'm not familiar with SB lathes but vaguely recall it might be a 4-1/2 taper. In case I'm wrong, it's Item # 301599800189.
111653854076. The shiny flanged piece in the middle of the lower row in the main photograph is one. I imagine that the odds of the seller being willing to sell only that piece are slim and none. But at least you can see what one looks like. The only thing near that I found on eBay tonight fits a Heavy 10. I'm not familiar with SB lathes but vaguely recall it might be a 4-1/2 taper. In case I'm wrong, it's Item # 301599800189.