-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
V-belt logan 200
- Thread starter PULLO
- Start date
- Joined
- Jul 27, 2013
- Messages
- 295
Hey;
They do not list the belts by model, only size. A 10" lathe could have a 1/2" x 40, 45, or 51" length depending on whether it was a floor or cabinet model. There is also a 5/8 x 29" belt listed for 10, 11, and 12" models, but it does not specify what models those are. This should get you close enough to measure and guess which you have.
They do not list the belts by model, only size. A 10" lathe could have a 1/2" x 40, 45, or 51" length depending on whether it was a floor or cabinet model. There is also a 5/8 x 29" belt listed for 10, 11, and 12" models, but it does not specify what models those are. This should get you close enough to measure and guess which you have.