- Joined
- Jul 20, 2023
- Messages
- 2
What are these used for ?
They seem quite narrow, too narrow to positively clamp something round with a diameter much more than 3x the groove width. On some shapers the groove is aligned with the stroke, on others it is perpendicular. Most importantly, not all shapers have a groove on one side of their table block.
They seem quite narrow, too narrow to positively clamp something round with a diameter much more than 3x the groove width. On some shapers the groove is aligned with the stroke, on others it is perpendicular. Most importantly, not all shapers have a groove on one side of their table block.