- Joined
- Nov 22, 2010
- Messages
- 371
Your tireless efforts have resolved my DRO problem om my SX3....Bu now I have a new question. Using a 12 volt adapter The light provided is " OK...Adaquate... But not what I would like... How much D/C voltage do you thinK theses little LEDs can stand and will that make the lights brighter ??? (probably a stupid question) I would like to find an A/C power supply that I can turn up slowly with a max DC voltage of 18 or possibly 24 volts DC if the lights can handle that.
I preyyt much am an electrophobic I don't want to build anything electrical... Just plug it in and wire my lights to the terminals and " Turn up the juice"
BTW I used two 46cm Led strips burchassed on E-Bay from china $ 8.00 for the pair INCLUDING SHIPPING.. took about 2 weeks to get them Photos attached
I preyyt much am an electrophobic I don't want to build anything electrical... Just plug it in and wire my lights to the terminals and " Turn up the juice"
BTW I used two 46cm Led strips burchassed on E-Bay from china $ 8.00 for the pair INCLUDING SHIPPING.. took about 2 weeks to get them Photos attached
Last edited by a moderator: