- Joined
- Dec 30, 2020
- Messages
- 15
Thanks for the verification.Not sure , but your pics came thru .
Hi Graham-xrf,Hi Lynn
Your pictures are just fine. Two ways are possible. Adding the thumbnail instead of the full size, most times, is OK
Interesting about the Mighty Mag as a way of mounting the read scale. I have yet to get to adding the DRO scales to my mill drill. All is still in transport crate/boxes. We have had threads here about getting these attached, especially such they avoid limiting Y-Axis motor drive travel.
I would never consider double-sided sticky anything to secure instrumentation to a machine anyway, but magnets is interesting. In your case, was it the magnet sticks to the machine, and also gets a grab on the end of the scale housing?
Hi Graham-xrf,Hi Lynn
Your pictures are just fine. Two ways are possible. Adding the thumbnail instead of the full size, most times, is OK
Interesting about the Mighty Mag as a way of mounting the read scale. I have yet to get to adding the DRO scales to my mill drill. All is still in transport crate/boxes. We have had threads here about getting these attached, especially such they avoid limiting Y-Axis motor drive travel.
I would never consider double-sided sticky anything to secure instrumentation to a machine anyway, but magnets is interesting. In your case, was it the magnet sticks to the machine, and also gets a grab on the end of the scale housing?
Now to post a thumbnail and see how that works...This is a test...
View attachment 349736
View attachment 349737
Let's see if this works. I'm new, and restricted to not posting links for three posts, but does attaching pic's constitute a link?
Lynn Edwards