- Joined
- May 26, 2017
- Messages
- 13
I just acquired a new machine with Tamagawa DC servo motors attached. I think they are about 19 years old. Type TS (which I don't know what that means) TS3352N7E67. I am trying to discover which encoder they have and how it functions. I suspect that what I see is not an encoder at all.
Six wires are going to the motor. The motor has two heavy gauge wires, Black and Red, to the main motor and ports to replace brushes. There are two green wires, both of which are grounded to the frame of the motor. Lastly, there are two wires (red and white) that go to a rotor on top of the motor with four contacts. I will include a picture. After 3 days of searching the net, I have nothing so here I am at the forms looking for answers. I suspect someone who has been doing this for a while will have the answer in short order.
My goal is to use these motors and restore their functionality with a Geko controller.
Thanks for having a look.
Six wires are going to the motor. The motor has two heavy gauge wires, Black and Red, to the main motor and ports to replace brushes. There are two green wires, both of which are grounded to the frame of the motor. Lastly, there are two wires (red and white) that go to a rotor on top of the motor with four contacts. I will include a picture. After 3 days of searching the net, I have nothing so here I am at the forms looking for answers. I suspect someone who has been doing this for a while will have the answer in short order.
My goal is to use these motors and restore their functionality with a Geko controller.
Thanks for having a look.