South Bend Mill & Tooling / #30 Taper

[kubes]

ok. Thanks for all that. It’s seems that a 30 taper will fit but the South Bend mill can’t use a drawbar. The motor is install right on top the spindle. So that made notches on the taper and have set screws that hold the tool.

So I guess I can grind a notch. And then have tooling to make milled notches.

I would like to hear from someone that own ones of these that the taper will definitely it.

 

[twhite]

ok. Thanks for all that. It’s seems that a 30 taper will fit but the South Bend mill can’t use a drawbar. The motor is install right on top the spindle. So that made notches on the taper and have set screws that hold the tool.

So I guess I can grind a notch. And then have tooling to make milled notches.

I would like to hear from someone that own ones of these that the taper will definitely it.

You might like this.

Cutting oil is my blood.