- Joined
- Feb 6, 2020
- Messages
- 257
i thought i described it. a large belt sander that starts with a big chuck of iron resting on it. 10hp runs at about 30@ but inrush at start is 185@
frequency of starts depends. you would have to stop it to check progress. could be done in one start or may take several. i could squeeze by with 4 starts an hour with the job taking about 5-15 minutes with all the starts
i'm thinking whatever i go with i should probably at least double the rating if not more. i assume a 20-30hp ss or vfd would not be detrimental
frequency of starts depends. you would have to stop it to check progress. could be done in one start or may take several. i could squeeze by with 4 starts an hour with the job taking about 5-15 minutes with all the starts
i'm thinking whatever i go with i should probably at least double the rating if not more. i assume a 20-30hp ss or vfd would not be detrimental