I wanted to thank everyone who responded to many of my dumb questions regarding my shaper. It is up and running. These things are a lot of fun!!!
Here is a test of a cutter for a job that I need to do. The test is in aluminum, the actual job will be in DOM tubing. Couldn't do it on the mill, at least not with the tooling on-hand, the grove follows the circumference of the OD of the material.
Here is a test of a cutter for a job that I need to do. The test is in aluminum, the actual job will be in DOM tubing. Couldn't do it on the mill, at least not with the tooling on-hand, the grove follows the circumference of the OD of the material.