- Joined
- Oct 9, 2014
- Messages
- 465
Here is a good milling tool. It is the SECOS Minimaster, which is very rigid. It is something completely different than most Chinese stuff regarding material quality and finish. The shank is used but not much. There was 11 cutters in the deal of which 10 are new. The cutter on the shank is used and has a small damage on the side.
The price for everything was 100 dollars, which is less than the retail price for a single insert ) The inserts have different shapes and the OD is 12 mm on them. The shank is 20 mm. This is the reason I've completed my ER32 chuck with the full series of collets from 2 to 20 mm.
[video=youtube;SxURm-QZNsM]https://www.youtube.com/watch?v=SxURm-QZNsM&feature=youtu.be[/video]
The price for everything was 100 dollars, which is less than the retail price for a single insert ) The inserts have different shapes and the OD is 12 mm on them. The shank is 20 mm. This is the reason I've completed my ER32 chuck with the full series of collets from 2 to 20 mm.
[video=youtube;SxURm-QZNsM]https://www.youtube.com/watch?v=SxURm-QZNsM&feature=youtu.be[/video]
Last edited: