- Joined
- Sep 19, 2012
- Messages
- 3,063
Today I got to sneak in some shop time netween the honey doos and the chores.
I got the shaft done, and the bevel cut.
I also pecked a 5/16" hole all the way through to help disapate heat and not let dust or debis get trapped under the draw bolt. Really cause I have a lathe and I can!
Now it needs a stub tenon and some threads, along with a tapped draw bolt hole (i know I should have done that before the taper) and it will be a done deal.
Sent from somewhere in East Texas Jake Parker
I got the shaft done, and the bevel cut.
I also pecked a 5/16" hole all the way through to help disapate heat and not let dust or debis get trapped under the draw bolt. Really cause I have a lathe and I can!
Now it needs a stub tenon and some threads, along with a tapped draw bolt hole (i know I should have done that before the taper) and it will be a done deal.
Sent from somewhere in East Texas Jake Parker