- Joined
- Mar 25, 2015
- Messages
- 95
Hi everyone, my name is Rick. I introduced myself a few months ago when I joined but this is my first post.
I just received my new PM932-PDF mill and I have a couple problems.
First, I can't get my R8 collets to fit, the Chinese pos ones that came with it fit but mine don't. I can't seem to find a drawing of the keyway slot anywhere, I want to check that first to see if my collets are too small or if the pin in the spindle is too big.
Second, I can't get the FINE FEED function to work. I tried following the chinglish directions that came with it but all it does is spin freely, I can't get it to engage so I can feed a thou at a time.
Before I call Matt or tear the gearbox apart I was hoping for some insight from you guys.
THANKS and now that I have my mill I won't be a stranger!!!
I just received my new PM932-PDF mill and I have a couple problems.
First, I can't get my R8 collets to fit, the Chinese pos ones that came with it fit but mine don't. I can't seem to find a drawing of the keyway slot anywhere, I want to check that first to see if my collets are too small or if the pin in the spindle is too big.
Second, I can't get the FINE FEED function to work. I tried following the chinglish directions that came with it but all it does is spin freely, I can't get it to engage so I can feed a thou at a time.
Before I call Matt or tear the gearbox apart I was hoping for some insight from you guys.
THANKS and now that I have my mill I won't be a stranger!!!