PM-1236T mounting bolt dimensions

[mech_tech]

Hey guys - New member here. Have a 1236T lathe on the way and am looking for the 6 mounting bolt locations in reference to an edge of the chip pan. If not ref'd to the chip pan, distances relative to one another will also work. I've been using the search function for the last 15min with no luck. Same with google.

 

[skcncx]

Hey guys - New member here. Have a 1236T lathe on the way and am looking for the 6 mounting bolt locations in reference to an edge of the chip pan. If not ref'd to the chip pan, distances relative to one another will also work. I've been using the search function for the last 15min with no luck. Same with google.

This may or may not be helpful, but I came across this thread (link below, page 6) which has a PDF attachment for a custom base plate and measurements... though, not in relation to the chip pan provided from PM.

PM-1236-T 12″x36″ Ultra Precision Lathe-Good Machine?

Here a drawing I had made for a steel plate I used for my PM 1236-T:

www.hobby-machinist.com

 

[mech_tech]

This is a great place to start. Thank you!