WTB Parts for proLIGHT lathe/mill

[crazybrit]

Hello. I'm looking for the following original parts. Pictures attached.

Intelitek/Light Machines proLIGHT 3000 CNC lathe (Turning Center).
- Collet closer
- Tailstock
- Turret tooling plate
- Blue control box (just empty box, don't need knobs, display or electronics).

Intelitek/Light Machines proLIGHT 1000/2000 CNC mill
- R8 spindle housing
- Tool changers

I'd also be interested in buying a second lathe/mill if it has some of the above parts. These machines were sold mostly to Technical Schools and Colleges and quite often get released as surplus. Within a 6 hour one way drive of Portland, Oregon.

If you have anything or know of someone who does I'd greatly appreciate a PM (click here).

Thank you for your time.

 

[crazybrit]

bump. still looking for parts.

 

[crazybrit]

bump. still looking for parts.

 

[crazybrit]

bump. still looking for parts.

 

[retired_Badger]

Just joined the forum this week. I have a Prolight 1000 with a tool changer. Never have gotten the tool changer working, as it is missing the “plug” that is used to calibrate it. Are you familiar with the ATC on the 1000, and aware of how to calibrate without the calibration plug? Otherwise, I have a fully functional Prolight 1000 with all original equipment, including the electronics. My nephew might have a Prolight 1000 that he’s parted out. Not sure what state it is in right now, but he could have an R8 Spindle housing. He’s in the Burley, ID area, and I’m in Utah County, Utah.

 

[crazybrit]

Replied via pm