OT, Insulation for the garage door

[BluCab]

I have a metal sectional door. I cut pink foam insulation for the panels and put it two pieces thick in the sections. The edges of the sections hold it in. No glue required.

I also bought 3 bicycle inner tubes, cut them and glued them together with silicon into one long tube. And taped them to the bottom of the door. Added a bit of air via the one valve stem I left on and it makes a good seal.

 

[8ntsane]

Thanks for all the idea,s and tips Guys
So far the seals are all done, I just have to get back over to Lowes and pick up the strafoam. That could be a problem without a Van or pick up.

Paul