Need small job machined (SF Bay Area)

[jnrcopeland]

Hello, I've been working with a friend for about a year now gathering funds and materials to machine a scaled-down liquid-fuel rocket engine to show off at our high school. We plan on machining parts out of 316 stainless and 360 brass and I have all of the cad drawings available in Fusion360. We are located in the San Francisco Bay Area, and I'm just having trouble figuring out who to go to for a small one-off job like this. Any help is greatly appreciated. We also have all of the metal stock already so we can just send that over to you. The engine altogether will be around 3 inches x 3 inches, so it's pretty small, and I've attached screenshots from the CAD drawings.

 

[markba633csi]

What's your budget on this project? I assume you will be adding dimensions and tolerances to the drawings
I don't have the time available but someone else might, and they will want to know those things
Mark

 

[stioc]

Agreed with Mark above also what's the timeline?
I take it this is the final assembly? the rest of the pics are parts that make this up?

 

[jnrcopeland]

We are hoping to get the parts by mid-August (18th-ish) and yes, that is the final assembly of the engine. I'll get the dimensions on this post as soon as I'm done with the technical drawings, sorry about that.

 

[JimDawson]

Maybe try your local makerspace, about 15 min north of you. https://beniciamakerspace.org/

 

[jnrcopeland]

Thank you, I'll take a look. I do however have someone who is willing to give it a go, so I may not need to have this post anymore, I'll keep it updated.