Hi Guys,
I got a used pm1030v and it got banged a bit before loading in the truck. I opened today to check the wires if anything broke and it seems intact no broken parts just the on/off switch was displaced 30 degree clockwise I guess the holding nut was not the tightened enough. On the manual it says connect power switch to forward and the tachometer lcd should light up. It does not. Only if I press the on button the motor starts and the lcd lights up. When pressing stop it goes out.
please guys, any ideas
I got a used pm1030v and it got banged a bit before loading in the truck. I opened today to check the wires if anything broke and it seems intact no broken parts just the on/off switch was displaced 30 degree clockwise I guess the holding nut was not the tightened enough. On the manual it says connect power switch to forward and the tachometer lcd should light up. It does not. Only if I press the on button the motor starts and the lcd lights up. When pressing stop it goes out.
please guys, any ideas