- Joined
- Sep 24, 2016
- Messages
- 125
Does anyone have any experience or comments on this product. Looking at possibly buying a 727 and thought this would be an interesting mod. Any input is welcome.
Thanks.
Thanks.
Thanks for the input!! I will check your vid out.Sure don't Chief, but I posted Part 3 of my draw bar build today. The biggest obstacle you will face with a commercial built power drawbar on the 727 is the space between the drawbar & motor - less than 1.5".
Sent from my iPad using Tapatalk
I love it!!!View attachment 137084 View attachment 137084 View attachment 137085 View attachment 137086
Buggy Chief, I chose the Maxi Torque for my mill. It is pretty much a plug and play set up except the drawbar has to be dimensioned to fit properly.
It also has an automatic oiling system to keep the drawbar lubricated. Requires 90# of air pressure to operate. Here are some pictures. I have had mine for about 3 years with no problems and it is a super time saver.
Bob
by the way...who did you order from?View attachment 137084 View attachment 137084 View attachment 137085 View attachment 137086
Buggy Chief, I chose the Maxi Torque for my mill. It is pretty much a plug and play set up except the drawbar has to be dimensioned to fit properly.
It also has an automatic oiling system to keep the drawbar lubricated. Requires 90# of air pressure to operate. Here are some pictures. I have had mine for about 3 years with no problems and it is a super time saver.
Bob
Thanks!!Chief, I purchased mine form Acer as that is the brand mill I have.