-
Welcome back Guest! Did you know you can mentor other members here at H-M? If not, please check out our Relaunch of Hobby Machinist Mentoring Program!
Jet 1336 pbd change gears
- Thread starter Myanmar1
- Start date
Welcome to H-M.
The Grizzly G9249, is in the JET 1024 and 1236 family of lathes. Many of the Grizzly parts are interchangeable. For my Jet1024P, the changes gears fit. For another member, I believe for his Jet 1236, the ID of the change gears was too large, so he made a shim.
For Reference my Change Gears from Grizzly have an 18mm ID.
Here a link to the Grizzly page were you can get spare parts, even though they no longer sell the G9249.
www.grizzly.com
Grizzly lists 3 40T spur Gears.
9249- 135 NLA
9249- 142 Backordered https://www.grizzly.com/parts/grizzly-spur-gear-40t/p9249142
9249- 143 Available https://www.grizzly.com/parts/grizzly-gear-40t/p9249143
From the parts diagrams on the first link, you should be able determine which gear you need.
Hope this helps. My 1024 has been a great lathe for me. Much sturdier than most currently available lathes in it's size range.
The Grizzly G9249, is in the JET 1024 and 1236 family of lathes. Many of the Grizzly parts are interchangeable. For my Jet1024P, the changes gears fit. For another member, I believe for his Jet 1236, the ID of the change gears was too large, so he made a shim.
For Reference my Change Gears from Grizzly have an 18mm ID.
Here a link to the Grizzly page were you can get spare parts, even though they no longer sell the G9249.
Parts for 12" x 37" Belt Drive Gap Bed Lathe
Grizzly Industrial, Inc. is a national retail and internet company providing a wide variety of high-quality woodworking and metalworking machinery, power tools, hand tools and accessories. By selling directly to end users we provide the best quality products at the best price to professionals...
Grizzly lists 3 40T spur Gears.
9249- 135 NLA
9249- 142 Backordered https://www.grizzly.com/parts/grizzly-spur-gear-40t/p9249142
9249- 143 Available https://www.grizzly.com/parts/grizzly-gear-40t/p9249143
From the parts diagrams on the first link, you should be able determine which gear you need.
Hope this helps. My 1024 has been a great lathe for me. Much sturdier than most currently available lathes in it's size range.