I’ve had numerous HY vfds and they have all worked fine. On my latest installation I hooked everything up, restored defaults, started the motor and nothing. But the led outputs seem to behave properly. It is showing me current, rpm, freq values that all make sense. The freq varies with the pot movement. I’ve triple checked the motor hookups and I know the motor is good. I had a friend try it on his machine.
a bad HY drive would not be a huge shocker, but I’m wondering if there is some setup parameter I’ve missed. Every other one has worked out of the box with defaults. But this thing is dead silent but thinks it’s working. Obviously these values are all calculated, not measured values, which is interesting.
it’s 220v, 2hp, the model is FC01. Any suggestions?
a bad HY drive would not be a huge shocker, but I’m wondering if there is some setup parameter I’ve missed. Every other one has worked out of the box with defaults. But this thing is dead silent but thinks it’s working. Obviously these values are all calculated, not measured values, which is interesting.
it’s 220v, 2hp, the model is FC01. Any suggestions?