Help to Id green lathe, possibly grizzly 10x22/24?
Its bed is 39.5'' long. Swing is about 9.75'' over ways. It has a 5 inch 3 jaw chuck .790 through spindle. No quick change gears. Has about 16 spare steel gears in tool box. I got this from a lady who was selling for her husband. It was given to him so no real history. Going to try post pics from phone, vista has been having problems.
Has V ways, 2.5'' stroke on tailstock. No thread dial. I just want to try to find a way to get a manual so I know how to arrange gears for different feeds and if I can add a thread dial. For the purchase price of $50 I was happy to try to figure it out later. Lathes are not posted for long down here. Been looking for a Logan 11x36 for a while. This little lathe will do alot of what I need for now. I assume it's a chinese/taiwan lathe since the 3 jaw and jacobs chucks say made in china.
No serial # or other identifier that I have noticed on the bed or headstock. Ways are about 7/16 thick at flats. 20mm leadscrew. It looks like the original motor was replaced and possibly had quick change gears/controls that were removed for whatever reason. Cross slide travel 4.75".
The lathe seems to fit most of the specs of a 10x22/24 just not current Grizzly production, except most new ones have 1'' spindle bore and a bit longer cross slide travel. I know Jet lathes were green years ago. Anybody know of any other asian manufacturers that painted their lathes green? Bed is ~5.25" wide from outside v-way to outside flat way.
Any help to ID the lathe or direct me to a 10x24 lathe group, where I might find some answers, will be much appreciated.
Seems odd this size lathe has no cross feed.
Its bed is 39.5'' long. Swing is about 9.75'' over ways. It has a 5 inch 3 jaw chuck .790 through spindle. No quick change gears. Has about 16 spare steel gears in tool box. I got this from a lady who was selling for her husband. It was given to him so no real history. Going to try post pics from phone, vista has been having problems.
Has V ways, 2.5'' stroke on tailstock. No thread dial. I just want to try to find a way to get a manual so I know how to arrange gears for different feeds and if I can add a thread dial. For the purchase price of $50 I was happy to try to figure it out later. Lathes are not posted for long down here. Been looking for a Logan 11x36 for a while. This little lathe will do alot of what I need for now. I assume it's a chinese/taiwan lathe since the 3 jaw and jacobs chucks say made in china.
No serial # or other identifier that I have noticed on the bed or headstock. Ways are about 7/16 thick at flats. 20mm leadscrew. It looks like the original motor was replaced and possibly had quick change gears/controls that were removed for whatever reason. Cross slide travel 4.75".
The lathe seems to fit most of the specs of a 10x22/24 just not current Grizzly production, except most new ones have 1'' spindle bore and a bit longer cross slide travel. I know Jet lathes were green years ago. Anybody know of any other asian manufacturers that painted their lathes green? Bed is ~5.25" wide from outside v-way to outside flat way.
Any help to ID the lathe or direct me to a 10x24 lathe group, where I might find some answers, will be much appreciated.
Seems odd this size lathe has no cross feed.
Last edited: