- Joined
- Aug 31, 2014
- Messages
- 50
Hi I took the discs back to the engineering shop. They cut the ID to 100mm. I am now busy with the OD. I fixed the disc in the 3 jaw chuck. I am running above 38rpm, because i am using a carbide tool. Because the OD was cut very rough, the workpiece have a hammer effect on the crossslide an tool. I am not sure how to approach the work. The OD differ up to 5mm at places and the biggest cut I can take is about 1mm. The rough disc.The OD and ID finished. The Carbide Tool I am using.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Last edited: