- Joined
- Aug 5, 2013
- Messages
- 125
Using a few of the examples here and on the web, I finally finished mounting my 9x20 to the 56" HF tool box.
I used a laminated MDF countertop on top of a 3/4" piece of plywood. Used 1-1/4" deck screws to hold the two pieces of wood together, then put 5/16" x 1" lag bolt through the existing holes in the top of the HF tool box from the inside up to the plywood.
So nice to use it and have it properly secured finally.
I used a laminated MDF countertop on top of a 3/4" piece of plywood. Used 1-1/4" deck screws to hold the two pieces of wood together, then put 5/16" x 1" lag bolt through the existing holes in the top of the HF tool box from the inside up to the plywood.
So nice to use it and have it properly secured finally.