I have a Turn-Pro bandsaw purchased from Enco, a step up from say a harbor freight but it is a mediocre in build quality. As far as I am aware, recent Enco branded machinery was mostly made in China, the Turn-Pro was made in Taiwan. Sometimes it may be a bit of both, often casting may be done in China mainland, then assembled in Taiwan. The Turn-Pro has a bit better castings, finish and quality of the components as other have mentioned. But nothing special from what I have seen.
MSC is often way over priced, so I do not see that you would get a deal, and probably nothing close to shopping around at some of the more mainstream suppliers/importers of mills. If you compare something like a 9x49 knee with variable speed head, the MSC Enco model will run you around 7K with a X-power feed, the Turn-Pro around 7.8K similarly equipped. Also for parts, I would rather go with a model that I know that has been around for awhile, I am not sure what is going to happen when the current Turn-Pro and Enco stock is sold off. Just think there are better alternatives for less, I recently purchased a knee mill and I feel got way more machine than similarly equipped machines offered by MSC and cost less for a similarly equipped Taiwanese machine. Also, when your spending that kind of money, I would either try to get some hands on experience or speak to someone who owns the machine you are interested in.