On another forum thread a member asked me to post pictures of my RF-30 one shot lube system. I thought it best that the pictures and responses reside in this manufacturer specific forum. So here goes.
This is a Bijur pump that I bought used off of eBay. It has worked flawlessly for more than five years. It didn't have a plunger handle so I made one.
This is the distribution manifold I made. I used Push-to-Connect fittings. On my CNC mill conversion I used 1/8" NPT x 1/4" hose compression fittings. Either will work.
The system is plumbed using 1/4" OD Tygon tubing. The lube system feeds the X and Y dovetails, three axis handwheel support brackets, and the X and Y axis feed screw nuts.
A close up shot of one side of the Y axis lube inlet.
This is a Bijur pump that I bought used off of eBay. It has worked flawlessly for more than five years. It didn't have a plunger handle so I made one.
This is the distribution manifold I made. I used Push-to-Connect fittings. On my CNC mill conversion I used 1/8" NPT x 1/4" hose compression fittings. Either will work.
The system is plumbed using 1/4" OD Tygon tubing. The lube system feeds the X and Y dovetails, three axis handwheel support brackets, and the X and Y axis feed screw nuts.
A close up shot of one side of the Y axis lube inlet.