- Joined
- May 12, 2014
- Messages
- 164
Could you explain how that would work without rotation?
[Edit] I assume you mean no rotation after rotatiing the assembly to zero all four indicators at one spot?
Correct John Hasler
Could you explain how that would work without rotation?
[Edit] I assume you mean no rotation after rotatiing the assembly to zero all four indicators at one spot?
I made due with two 2" long 7/16" carriage bolts and one 2" long 3/8 bolt, and a 12" long 1/2" square stock. I drilled and tapped for a 7/16" bolt one inch in from each end of the square stock( at the 1 and 11 inch marks).
I like this idea but if you drill a 7/16 hole in a 1/2 square , the wall will be a mere 1/32 think if the hole are straight or the drill is not over sized
I made one of these a couple days ago after seeing this thread, it works really well. It's truly amazing how much simpler it is to tram a mill in than just a DTI in one of those crappy, slippy over-the-quill holders. Thanks to iron man for giving me the inspiration to make it!