- Joined
- Dec 8, 2014
- Messages
- 84
So I got my ring gages. I also brought everything in the house to bring the part temps up to 70 degrees.
Please check my math and reasoning
I got a 45mm XX Edmunds gage = 1.7716"
Set the Dial bore to 0 with the ring Gage. Measured the rod bearing size got .0022 larger (yes I had to interpolate the .0002) so the bearing bore 1.7716+.0022= 1.7738'
Crank measured 1.7708
Clearance 1.7738-1.7708=.003 clearance
Please check my math and reasoning
I got a 45mm XX Edmunds gage = 1.7716"
Set the Dial bore to 0 with the ring Gage. Measured the rod bearing size got .0022 larger (yes I had to interpolate the .0002) so the bearing bore 1.7716+.0022= 1.7738'
Crank measured 1.7708
Clearance 1.7738-1.7708=.003 clearance