Building a Sheet Metal Brake by Mark Frazier

[lockstocknbarrel]

Hello everybody can anybody help with a set of plans for Mark's....Building a Sheet Metal Brake back in Jan 2015.
Kindest Regards Beagles.

 

[extropic]

Mark's thread was in Jan 2016. He explains, in the OP, where to find the plans.

My Next Project - A Metal Brake

I have been wanting a sheet metal brake for quite some time , but they are expensive and won't handle anything very heavy. After searching off and on for a couple of years, I settled on the one designed and built by J. R. Williams. The only thing I would change is I want it to be a finger pan...

www.hobby-machinist.com

 

[projectnut]

Here's a link to another thread about building a sheet metal brake. The original version built by JR Williams

Sheet Metal Brake

This is a project I've had in the works for a couple years. I didn't work on it on a daily basis, or even a monthly basis for that matter. It's been sort of a fill in thing for when I had a few extra minutes to spend in the shop. With the recent "social distancing" recommendation I felt it...

www.hobby-machinist.com

The original plans are in post #4. In this case the original machine was only 12" wide. My version in the pictures is scaled up to 36" wide.