Though not an Atlas, Stefan Gotteswinter has some nice videos on Shaper Work. His is a Gack HE20, which he describes as a Toolroom Shaper, that can be run in with a more traditional Push Clapper Box and in Pull Mode with a Clapper box change.
There's also an Old Video by Rudy Kouhoupt, called "Operating a Shaper" which is still available, that is a good primer on Shapers.
There's also an Old Video by Rudy Kouhoupt, called "Operating a Shaper" which is still available, that is a good primer on Shapers.
Rudy Kouhoupt DVD « DVDs « Machinist's Resources « Metalworking « Storefront « VP
secure.villagepress.com