- Joined
- Mar 5, 2014
- Messages
- 381
I have used up my inventory of randomly acquired inserts for my randomly acquired tool holders and must now choose and purchase some more.
I have two boring bars that use TCMT 21.51 and 32.5 inserts some RH turning tools DNMG43 and NPL51 I mostly cut steel and stainless with these. Any advice? especially bargains of course.
My Lathe is a very heavy 11 inch Weiler Tool room Lathe, very stiff high speed and lots of power.
Thanks
JD
I have two boring bars that use TCMT 21.51 and 32.5 inserts some RH turning tools DNMG43 and NPL51 I mostly cut steel and stainless with these. Any advice? especially bargains of course.
My Lathe is a very heavy 11 inch Weiler Tool room Lathe, very stiff high speed and lots of power.
Thanks
JD
Last edited: