- Joined
- Mar 10, 2013
- Messages
- 324
I had some time while waiting for other parts on order.
So I thought I would post my chuck upgrade. I did this about 6 months ago from Brian's site
http://briansworkshop.weebly.com/
It turned out great, Plus since then I had found the spindle was bent or poorly made.
I will need to recheck it for run out once everything is back together.
I bored it to 20mm.
So I thought I would post my chuck upgrade. I did this about 6 months ago from Brian's site
http://briansworkshop.weebly.com/
It turned out great, Plus since then I had found the spindle was bent or poorly made.
I will need to recheck it for run out once everything is back together.
I bored it to 20mm.