- Joined
- Nov 26, 2010
- Messages
- 150
I’m trying to figure out what the Spindle Taper is on my 1938, 16” South Bend?
All the manuals I find spec. to be #3 Morse Taper.
Mine measures 1.536” ID on the spindle with the 2 3/8” – 6 thread with the 1 3/8” through hole.
The #3 Morse taper should be 0.9380 on the big end.
Thanks
All the manuals I find spec. to be #3 Morse Taper.
Mine measures 1.536” ID on the spindle with the 2 3/8” – 6 thread with the 1 3/8” through hole.
The #3 Morse taper should be 0.9380 on the big end.
Thanks