- Joined
- Dec 3, 2013
- Messages
- 1,849
I'm looking for a spindle/VFD for my smallish router project. I only have one 220v circuit in the garage which is shared between my lathe, mill and air compressor (not used simultaneously). I also have two dedicated 110vac circuits. It would be ideal to be able to use the router on 110v so the lathe or mill could be used at the same time.
Automation Technologies lists a 110v 1.5 kw VFD/spindle package but I am skeptical.
From what I have read it was my understanding that 110v VFD's were usually limited to 1hp or less? Our lathe at the school is supposedly rated at 1.5hp and being driven by a Delta VFD at 110v?
Wondering if anyone has any experience with this?
Thanks,
Jay
Automation Technologies lists a 110v 1.5 kw VFD/spindle package but I am skeptical.
From what I have read it was my understanding that 110v VFD's were usually limited to 1hp or less? Our lathe at the school is supposedly rated at 1.5hp and being driven by a Delta VFD at 110v?
Wondering if anyone has any experience with this?
Thanks,
Jay