- Joined
- Dec 8, 2013
- Messages
- 2,651
It's also an the NPT thread for 1", 1.25", 1.5", and 2" pipe.I believe garden hoses and pop bottles are 11.5 TPI. So are M1 barrels strangely enough.
It's also an the NPT thread for 1", 1.25", 1.5", and 2" pipe.I believe garden hoses and pop bottles are 11.5 TPI. So are M1 barrels strangely enough.
11.5 TPI is NTP standard for 1", 1.25", 1.5", and 2" pipe.I have a PM1236 lathe and I need to make a part with 11.5 threads per inch. 11.5 is not listed in the threading chart on the side of the lathe but I was wondering if there is a way to do it? Also, the change gears on my lathe are so tight that I need to use a gear puller to get them off. Is that normal?
can a PM1236 be modified to cut finer than 60TPI?
I'm new to the machining world so this might be a simple answer for some of you more experienced guys , but can a PM1236 be modified to cut finer than 60TPI?