- Joined
- Jun 29, 2014
- Location
- Saint Albans, Vermont, USA
LOL. Yeah, I was second guessing my ambition on this last night. I think I'll just file one up tonight.
But the laser is fun!
But the laser is fun!
This appears to be the setup I have. I'm not inclined to try and remove anything from the gear as I fear it will fall into the belly of the beast and I'd rather cut chips than dissassemble the back of the base and fish around with a magnet for a spring and ball.If not, first remove the set screw. Then use a small hook to remove the spring. And finally a magnet to remove the ball. If the direct drive pin still doesn't move, fill the hole with penetrating oil and try it again tomorrow.